4-
3
.
Install the Customer Display
1.
Follow the steps in Chapter 3-1 to diassemble the stand from the LCD panel.
2.
Remove the thumb screw (x1) from the VESA top cover and then pull the cover
up.
3.
Attach the LCM module to system by fastening the thumb screw (x1).
4.
Route the cable through the hole of the stand as picture shown.
5.
Attach the stand to the LCD panel and fasten the thumb screw (x1).
6.
Connect the
USB
cable to
a USB
port on the systems IO panel.
* Please note the cable cover (refer to Chapter 3-2) have to be removed before
routing the cable.
10
