4
High Dynamic Range LUT BOX-4K
HLB-4K
2.
Location and Function of Controls
Front Panel
A : Input Selection Buttons
Press the bu on to select the signal input.
[HDMI]
- Press the bu on to select HDMI input.
[SFP SINGLE]
- Press the bu on to select one channel of SFP input. The SFP Module should be connected to the
SFP 1 Connector.
[SFP DUAL]
- Press the bu on to select SFP Dual-Link.
[SDI SINGLE]
- Press the bu on to select one channel of the SDI input. The mode changes in the order of
SDI 1, SDI 2, SDI 3, SDI 4.
[SDI D-2S.I]
- Press the bu on to select the SDI Dual-Link 2-Sample Interleave mode. The input cables should
be connected to the SDI 1 and SDI 2 Connectors.
[SDI Q-2S.I]
- Press the bu on to select the SDI Quad-Link 2-Sample Interleave mode.
[SDI SQUARE]
- Press the bu on to select the SDI Quad-Link Square Division mode.
B : Output Selection Buttons
[SDI SINGLE]
- Press the bu on to select one channel of the SDI. The mode changes in the order of SDI 1, SDI 2,
SDI 3, SDI 4.
[SDI D-2S.I]
- Press the bu on to select the SDI Dual-Link 2-Sample Interleave mode. The input cables should
be connected to the SDI 1 and SDI 2 Connectors.
[SDI Q-2S.I]
- Press the bu on to select the SDI Quad-Link 2-Sample Interleave mode.
[SDI SQUARE]
- Press the bu on to select the SDI Quad-Link Square Division mode.
A
B
