POSTEK PPLE COMMAND MANUAL
27
B4. Command reference
T120, 50, 0, 4, 1, 1, N, C0
WA2
FE
N
Q20, 0
FR”TEST1”
?
100
Printout:
Q Command: Set Form and Gap Length/black line/ perforation
Description: Use this command to set the form and gap length, black line thickness or perforation.
Syntax: Qp1, p2<LF>
Parameter explanation:
p1: Label length measured in dots. Value range: o to 65535
Default: length of media set by AutoSense.
p2: Gap length or thickness of black line/perforation, in dots. Value range: 16 to 240
The value of p2 is directly related to the mode being used.
Gap mode: By default, set p2 to the gap length. In special cases perforations are used in Gap Mode.
Black Line Mode: Set p2 to the black line thickness in dots.
Continuous Media Mode: Set p2 to 0 (zero); The transmissive (gap) sensor will be used to detect the end of
media.
Example:
1. Common Gap mode:
