background image

5

About this Guide

1.2

About this Guide

This guide introduces you to the Teleline Standalone Power Supply Unit, its 
features and applications, and describes how to install it in a Teleline shelf. This 
guide was designed to be read from beginning to end.

1.2.1

Related Documentation

The other guides in the Teleline set are listed below. To order any manuals, please 
contact your customer service representative.

Q

Teleline System Manual 

Q

Teleline System Overview

Q

Teleline Product Guide

1.2.2

Positron Products and Services

Positron engineers and manufactures high voltage isolation products to protect 
personnel and telecommunications circuits in high voltage areas that are 
susceptible to the effects of Ground Potential Rise (GPR). 

Positron is the leader in isolation technology with its Teleline wireline products and 
TeleLite optical fiber wireline isolation/protection product families. Positron 
provides total flexibility in product configuration – from standalone units protecting 
a single circuit to high-capacity, multi-shelf HVI preconfigured systems.

Positron also provides a wide range of consulting, analysis and training services 
for communications companies and electrical utilities.

Full details and contact information are available at www.PositronPower.com

Summary of Contents for Teleline 7715-24



























Reviews: