GAM Quick Installation Guide
Positron Access Solutions
21
Document 180-0193-001 R01
Safety and Warnings
To ensure your safety when servicing and installing this equipment, please take
the following precautions:
The GAM products accept 110-220Vac for powering (50-60Hz). A properly fused
3-contact (live-neutral-protective ground) power outlet wired in accordance to the
National Electrical Code shall be used to provide the power to the GAM unit.
A power cord meeting IEC 60320 (C13 type) is supplied with the GAM device
and shall be used to bring power to the GAM. The primary protective ground
(earthing) is provided through this cord.
The power cord must always be disconnected before servicing the accessible
front panel fuse to prevent from risk of electrical shock. Always use a
replacement fuse of the proper current rating.
Only qualified personnel should service this system.
All wiring external to the product should follow the local wiring codes.
Use of this product in a manner other than defined in this installation guide may
cause damage to equipment or injury to personnel.
If a problem has been isolated to this unit, do not attempt to repair. The unit’s
components are not user serviceable and therefore must not be replaced. Please
return the unit to Positron Access Solutions for repair.
Observe local practice electrostatic discharge precautions when handling
electronic equipment. Do not hold electronic plugs by their edge. Do not touch
components or circuitry. Use a grounding wrist strap attached to a grounding
connection point. Use only ESD-protective packaging materials when
transporting equipment.
When installing in a closed or multi-unit rack environment, ensure that the
maximum operating ambient temperature of 45°C (113°F) is not exceeded.
