BRX-XLR User Guide
4
180-0145-001-R05
There are no user-serviceable parts in BRX-XLR-2 devices. Do not attempt to open the unit. Doing so
may damage the seals and prevent the unit from meeting IP65. Rain water may leak into the unit and
damage its electronics leading into either its malfunction or its total failure. The BRX-XLR-2 units
should only be opened by a technician trained and certified to service the product.
All wiring external to the product should follow the local wiring codes.
Be careful when splicing the BRX-XLR pairs to the twisted telephone cable pairs. Dangerous voltage
can be present on the pairs. Splicing should be done by a qualified person. Never splice pairs during
a lightning storm.
The equipment must be connected to a protective ground in accordance with the instructions provided
in this manual. Always ensure that BRX-XLR units are connected to a chassis ground path of 25 ohms
or less to avoid damage to the equipment from lightning strikes and other electrical surges.
Use of this product in a manner other than defined in this installation guide may cause damage to
equipment or injury to personnel.
All fuses on the unit are located in non-accessible areas and are not field serviceable. Please return
the unit to Positron Access Solutions for repair.
The BRX-XLR products are intended for installation in Restricted Access Locations only whether
installed indoor or outdoor.
