37
Roller Position Adjustment
During Programmed & Focused Massages...
Roller position cannot be adjusted after the scan is complete.
During Manual Air Massages...
If the roller is sitting in a position which is uncomfortable, you can adjust its location by using the up/down roller
buttons to move the massage mechanism to your desired location. The up arrow will move the rollers up the back toward the
shoulders, while the down arrow will move the rollers down the back toward the glutes.
Combining Manual & Manual Air Massages
•
A Manual massage method may be combined with an air massage.
•
To activate air massage with a manual massage, if not already there, press Home/Menu to access the Main Menu.
Use the navigation arrows, located in the center of the remote, to scroll to the desired Manual Massage, press OK to
select. Then use the navigation arrows to scroll to the desired Manual Air Massage, press OK to select.
NOTE: Only one manual and one air method can be combined at any one time.
Heat
•
The chair is equipped with heat in the rollers, seat and calf. Heat can be enjoyed on its own, or during any
massage session.
•
To turn heat on, press the Heat button on the remote. When heat is on, the button will illuminate red.
•
To turn heat off, press the Heat button a second time. When heat is off, the button will not be illuminated.
•
If heat is desire in only select zones, this can be adjusted by, if not already there, pressing Home/Menu to access the
Main Menu. Use the navigation arrows, located in the center of the remote, to scroll to settings in the Main Menu,
then scrolling right to Heat Zones. Then use the navigation arrows highlight the zones which you’d like to deactivate/
activate. Press OK to change from ON to OFF and back again. A blue dot next to the zone name indicates ON, a
clear dot indicates OFF.
NOTE: Heat automatically turns on with all programmed and focused programs excluding Cool Down.
Link Another Massage
•
To enjoy two massages back-to-back and without interruption, you can link a second message to your first massage
selection. When the first massage completes, the second massage will immediately begin.
•
To link, use the navigation arrows located in the center of the remote to navigate to the active program. Then use the
right arrow to scroll to “Link Another…” Press OK. You should now be in the Link Another Massage menu.
OPERATION & USE
