7
Platform Maintenance
Only use supplied tools when performing maintenance .
Positive Gaming is not liable for any damages on the product or health injuries,
occurred by opening, repairing or modifying the product .
Dirty Surface
Cleaning the surface of the dance platform should be done with the use of a rag and a light
spray of surface cleaner . Apply the surface cleaner to the rag, not directly to the platform .
Electronics can be damaged due to over exposure to spray cleaner, water, or other liquids .
Troubleshooting
Unresponsive Arrow Panels:
The contact metal beneath each arrow panel may have become dirty .
1
Disconnect the controller box from the platform .
2
Unscrew all 20 large screws and the two small
screws on the tag of the upper right corner of
the dance platform .
3
IMPORTANT:
Carefully lift the right upper corner
of the plastic cover a bit and disconnect the two
wires by pulling them to the right
(See Figure 5)
4
Remove the top plastic cover completely .
5
Lift each arrow panel by the notch moulded in
each base .
(See Figure 6)
6
Fold each arrow panel back . To avoid ripping out
the connected wires, do not remove the arrow
panels completely .
7
Clean the metal panels lightly . Do not use
aggressive chemicals or abrasive materials .
8
Vacuum any remaining dust, dirt or debris .
9
Reassemble, making sure all wires are securely
connected, all white washers are in place and
the screws are properly fastened .
!
Figure 5
Figure 6
Summary of Contents for Impact Arcade
Page 5: ...Diagram 4...
