Page 11
System Recovery
For TX systems preloaded with Windows POS Ready / Win 7 / Linux on HDD
or Solid State Drive, Posiflex provides recovery DVD delivered with the
terminal for the preloaded operating system.
The System Integrator shall
take care of software restoration after OS recovered.
A Posiflex supplied
USB interface DVD drive will be required for such action. Other brand DVD-
ROM drive may require its own driver different from what supported in the
recovery DVD.
Please use the recovery DVD in rescue operation only. Using it otherwise
may wipe out whatever stored in the storage device!
All upgrade devices
drivers needed for manual installation in usual way are available in the
subfolder “\drivers” in OS recovered HDD and the latest versions of these
required drivers will be available on our web: http://www.posiflex.com. Then
follow instructions from your system integrator for software recovery.
Operating System Installation
This product is highly professionalized equipment. The installation of an OS
into a machine without any preloaded OS could be a major difficulty for
average user or obstacle by possibly unintentional negligence even for PC
veterans to accomplish such a task. Therefore, OS installation into a system
without preloaded OS is highly discouraged. Posiflex Technology, Inc. shall
not be responsible for any technical support to questions in this aspect.
APPLICATION ENVIRONMENT
It is
very
important that you check the following operational guidelines:
Ventilation
This terminal must
NOT
be operated in an environment with restricted
ventilation. There must be at least 25 mm air clearance around any top or side
ventilation holes with a free flow of air around the unit at
ALL
times for the
installation.
Operating Environment
The equipment must not be operated or stored in extremes of both temperature
and humidity/moisture. (Operating range 0°C to 40°C and up to 80%
humidity – none condensing, max. wet bulb 26
°
C)
Power Supply
The operating voltage range of the power adaptor should cover the local power
supply for proper operation. The power cable, the power outlet and any power
fusing arrangements must conform to local safety regulations.
