background image

 

 
 
 
 
 

FCC Notes: 

This  equipment  generates,  uses,  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and 
used in accordance with the instructions manual, may cause interference to radio communications. 
It has been tested and found to comply with limits for a Class A digital device pursuant to subpart 
B  of  Part  15  of  FCC  Rules,  which  are  designed  to  provide  reasonable  protection  against 
interference  when  operated  in  a  commercial  environment.  Operation  of  this  equipment  in  a 
residential area is likely to cause interference in which case the user at his owns expense will be 
required to take whatever measures to correct the interference. 
 

Warranty Limits: 

Warranty  terminates  automatically  when  any  person  other  than  the  authorized  technicians  opens 
the machine. The user should consult his/her dealer for the problem happened. Warranty voids if 
the user does not follow the instructions in application of this merchandise. The manufacturer is by 
no means responsible for any damage or hazard caused by improper application. 
 

About This Manual: 

Posiflex has made every  effort for the accuracy of the content in this manual. However, Posiflex 
Technology, Inc. will assume no liability for any

 

technical inaccuracies or editorial or other errors 

or  omissions  contained  herein,  nor  for  direct,  indirect,  incidental,  consequential  or  otherwise 
damages,  including  without  limitation  loss  of  data  or  profits,  resulting  from  the  furnishing, 
performance, or use of this material. 

 

This  information  is  provided  “as  is”  and  Posiflex  Technology,  Inc.  expressly  disclaims  any 
warranties,  expressed,  implied  or  statutory,  including  without  limitation  implied  warranties  of 
merchantability or fitness for particular purpose, good title and against infringement. 
The information in this manual contains only essential hardware concerns for general user and is 
subject  to  change  without  notice.  Posiflex  Technology,  Inc.  reserves  the  right  to  alter  product 
designs,  layouts  or  drivers  without  notification.  The  system  integrator  shall  provide  applicative 
notices and arrangement for special options utilizing this product. The user may find the most up 
to date information of the hardware from: http://www.posiflex.com or http://www.posiflex.com.tw 
or http://www.posiflexusa.com 
 
All  data  should  be  backed-up  prior  to  the  installation  of  any  drive  unit  or  storage  peripheral. 
Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this 
or any other Posiflex product. 
 
All  rights  are  strictly  reserved.  No  part  of  this  documentation  may  be  reproduced,  stored  in  a 
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, 
or otherwise, without prior express written consent from Posiflex Technology, Inc. the publisher of 
this documentation. 
 

©

 Copyright Posiflex Technology, Inc. 2013 

All  brand  and  product  names  and  trademarks  are  the  property  of  their  respective  holders.

TX-4200/4200E/4200R 

Fan Free Terminal 

User’s Manual

 

Rev.: A0 

P/N: 

14520900020

 

Summary of Contents for TX-4200













Reviews: