TP6000 USER’S MANUAL 4 - 5
the hole and make sure that all pegs are inside the holes. Then slide the main unit
down to move the pegs into the lower slot part of the holes till it clicks. Note that all
the cables come out of the paddle from the lower edge and won’t get trapped by this
mounting operation. If later on you want to remove the main unit from the paddle,
you’ll have to press down the lock/release button on back of the paddle at the time
lifting the main unit.
OPENING CABLE COVER
Insert the tip of the latchkey into a latch hole on one side near bottom of the
main unit. Turn this key counterclockwise to the end. Do the same on the opposite
side. Be sure to take the key out of the hole.
Then push the lock/release lever on the base backward to adjust the paddle to
the most horizontal position for ease of operation. Open the cable cover by pulling at
the removal hollow.
Turn Counterclockwise
Then Take Out The
Latchkey
Pull The Removal Hollow
Toward The User
