Mounting the Rear-Mount Display onto a POS Terminal
This section provides step-by-step instructions to assist you in installing
PD-6807U/6807R to PS-3000 series POS terminal. As a reminder,
please ensure that your POS terminal is completely shut down before
proceeding with installation of PD-6807U/6807R.
1.
Remove the rear I/O cover of your
PS-3000 series POS terminal.
2.
Insert the USB or RS-232 cable into the POS terminal.
For PD-6807U model, align the A type connector of the USB
cable with the USB port of your POS terminal; for PD-6807R
model, have the RJ50 connector of RS-232 cable with a label
describing “To Host” attached to RJ50 port of the POS terminal.
PD-6807U
PD-6807R
3.
Align the four screw holes of the
customer display bracket with the four
screw holes on the rear side of the POS
terminal.
Align
To Host
3
