POSIFLEX PD-350R, User Manual

Page: 4 / 6

FOR OPOS APPLICATION:
Find the subfolder \Drivers\UPOS\OPOS of the Posiflex Product Information
CD or DVD or download it from web site:
http://www.posiflex.com.tw/Download%20list.asp?Status=1&Series_Name=U
POS&Model_Name=OPOS and execute the file “SETUP.EXE” to install the
OPOS Control Manager. To add the customer display under OPOS control
please set in OPOS Control Manager device name “PD3x-Line Display” in the
top row. For RS-232 models, select the COM port in the 3
rd
row and set baud
rate to “9600” in 4
th
row as illustrated.
APPLICABLE COMMANDS
(FOR PD-340R/350R)
For PD-340R/350R, it is always the Epson command mode at power on. It can
enter or exit the PST command mode through software command.
EPSON COMMAND MODE (POWER ON DEFAULT):
NAME HEX CODES FUNCTION
BS <08> Move Cursor Left
HT <09> Move Cursor Right
LF <0A> Move Cursor Down
HOM <0B> Move Cursor To Home Position
CLR <0C> Clear Display Screen
CR <0D> Move Cursor To Left Most Position
CAN <18> Clear Cursor Line
ESC = <1B><3D><n>
Select Peripheral Device / Command Mode
n=1 pass through (should not be used)
n=2, 3 (not required)
n=4 switch to PST command mode
ESC @ <1B><40> Initialize Display
4