background image

 

PD2500 Series 

 

USER’S MANUAL

 

 

Rev. : A3 

VFD CUSTOMER DISPLAY 

for ALPHANUMERICAL DISPLAY 

in 2 x 20 format 

I. FEATURES 

 

Stand-alone Pole Display with a mount plate and small base size with a 
rock power ON/OFF switch on base (PD2500). Rear mount Pole 
Display for Posiflex Jiva XL series touch terminals (PD2501) 

 

Euro dollar sign supported in code page 858 

 

Various command emulation modes selectable by DIP switch 

 

Total height 556mm above mounting plate with a strong, stable pole 

 

0° to 45° tilt in four steps and 300° swivel for best viewing effect 

 

Cabinet color choices: ivory, charcoal 

FCC NOTICE

 

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to 
comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to 
provide reasonable protection against interference when operated in a commercial environment. Operation of this 
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to 
take whatever measures to correct the interference. 

WARRANTY LIMITS 

Warranty will terminate automatically when the machine is opened by any person other than the authorized 

technicians. The user should consult his/her dealer for the problem happened. Warranty voids if the user does not follow 
the instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or 
hazard caused by improper application. 

ABOUT THIS MANUAL

 

This manual assists the user to utilize the VFD customer display PD2500 series. Theses series provide 

versatile font formats and support various instruction sets. These series of products receive instructions in serial 
communication protocols and is capable of entering pass through mode so that all instructions received pass on to next 
connected serial device if properly configured. 

The manufacturer of the PD-2500 series heartily apologizes to the user for reserving the right to change or to 

modify this manual without notice due to the rapid and constant progress and improvement on science and technology. 
The user may always obtain the most up to date information through any of our web sites: http://www.posiflex.com.tw, 
http: //www.posiflexuk.com, http://www.posiflexusa.com. 

 Copyright Mustek Corp. 2002 

TRADE MARKS AND SERVICE MARKS 

POSIFLEX is a registered trademark of Mustek Corp.. 
Other brand and product names are trademarks and registered trademarks and service marks of their respective 

owners. 

P/N: 19450900020 

Summary of Contents for PD-2500 Series

Page 1: ... LIMITS Warranty will terminate automatically when the machine is opened by any person other than the authorized technicians The user should consult his her dealer for the problem happened Warranty voids if the user does not follow the instructions in application of this merchandise The manufacturer is by no means responsible for any damage or hazard caused by improper application ABOUT THIS MANUA...

Page 2: ...ugh device to 9 pin male connector at side of PD2500 base if required Stand plate Bottom view of cash drawer Base cabinet 3 For PD2500 with power adaptor only Use the attached interface cable 20863035900 CCBLA 359 to connect the 9 pin female connector at side of the base of PD2500 to the 9 pin male connector for serial port such as COM1 of the host PC Check the specification of power adapter on it...

Page 3: ... to the COM port connected Open the rear connect area and assemble the base of PD2501 into the opening according to the instruction given for Jiva XL Connect the 9 pin female connector of the cable coming from bottom of PD2501 to the 9 pin male connector for serial port of the Jiva XL 7 For all PD2500 PD2501 Turn on the Jiva XL Posiflex POS system the PC connected and the power switch of PD2500 mo...

Page 4: ...Hz O P 12VAC 5 heavy duty PC power 12 V DC Interface power 5 V DC D Environmental Operating temperature 0 C to 40 C Storage temperature 20 to 70 C Operating humidity 20 RH 85 RH non condensing Storage humidity 5 RH 90 RH non condensing Vibration resistance 4 G max half amplitude 0 15mm Impact resistance 40 G 11 ms wave 5 times for each of the X Y and Z directions WARNING If the user opens the pole...

Reviews: