background image

 

 

Part 1 

 
 
 
 

I. 

FEATURES 

• 

Light weight and high luminance LCD 
monitor for industrial and commercial use 

• 

Application covers POS, POIS (Kiosk), factory Automation etc. 

• 

High quality 12.1” TFT LCD panel with scaling up function for full screen 
display 

• 

Successor from earlier LM-6100 series and supports display resolution up 
to 800 x 600 pixels   

• 

Tilt and swivel adjustable construction 

• 

Spill proof and easy maintenance structure allowing easy cleaning

 

FCC NOTICE

 

This equipment generates, uses, and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions manual, may cause interference to radio 
communications. It has been tested and found to comply with limits for a Class A digital device 
pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection 
against interference when operated in a commercial environment. Operation of this equipment in a 
residential area is likely to cause interference in which case the user at his own expense will be 
required to take whatever measures to correct the interference. 

WARRANTY LIMITS 

Warranty will terminate automatically when the machine is opened by any person other 

than the authorized technicians. The user should consult his/her dealer for the problem happened. 
Warranty voids if the user does not follow the instructions in application of this merchandise. The 
manufacturer is by no means responsible for any damage or hazard caused by improper application.  

ABOUT THIS MANUAL

 

This manual assists the user to utilize the LCD Monitor LM-6200 series. This series is a 

12.1” LCD monitor of long endurance industrial standards. The LM-6212 is a stand alone monitor 
for kitchen video KV series host system while LM-6201 is a upgrade kit particularly designed for 
Posiflex touch terminal TP series or the kiosk system KS series. 

The manufacturer of the LM-6200 series heartily apologizes to the user for reserving 

the right to change or to modify this manual without notice due to the rapid and constant progress 
and improvement on science and technology. The user may always obtain the most up to date 
information through any of our web sites: http://www.posiflex.com.tw, http: //www.posiflex.com, 
http://www.posiflexusa.com. 

 Copyright Posiflex Inc. 2006 

TRADE MARKS AND SERVICE MARKS 

POSIFLEX is a registered trademark of Posiflex Inc.. 

Other brand and product names are trademarks and registered trademarks and service marks 

of their respective owners. 

P/N: 19050902010 

LM-6200 Series 

LCD Monitor 

User’s Manual

 

Rev. Original

Summary of Contents for LM-6200 Series











Reviews: