Application Guides: Peripheral Setup
KS-6910/6910TS/6910HS Technical Manual 28
2.
Select one of the three options:
Stay Off: When the power is back, the system stays powered-off until the power
switch is again pressed.
Last State: When the power is back, the system resumes to the previous state
just before the power outage.
Power On: When the power is back, the system boots up normally.
3.
Press Enter to apply the change.
Save Changes and Exit BIOS
To apply all changes and exit BIOS setup,
Press F10 to save the changes and exit, or
Select Exit tab, select Exit Saving Changes, and then press Enter.
Peripheral Setup
HDD, SSD and CF Reader Issues
As described in the User’s Manual, the system data storage device may take
variation from the default 2.5” SATA HDD in main unit to have an optional 2.5”
SATA HDD in base or to use a SATA SSD or an internal CF memory card reader
instead of the default HDD. Please check the BIOS setting accordingly if the
configuration has been changed.