background image

 

 

Part 12

OPERATING SYSTEM RECOVERY 

For KS systems with operating system in the Compact Flash Card, 

once the Compact Flash is damaged for any reason, the thin client may fail to 
boot. 

A bootable new Compact Flash Card will be required to have the 

workstation back to work

. Please follow instructions given by the System 

Integrator to deal with situations like that. One more advice for CF Card 
application is that in spite of the fact that it is used in the way like an ordinary 
HDD, usual utilities such as 

FDISK.EXE or FORMAT.COM shall never be 

used on CF Card

 otherwise the boot sector of operating system itself may be 

damaged and causing the CF Card no longer bootable. 

For KS systems preloaded with Windows XP Pro or WEPOS on HDD, 

Posiflex provides recovery CD delivered with the touch terminal for the 
preloaded operating system. The System Integrator shall take care of software 
restoration after OS recovered. A Posiflex supplied USB interface CDROM 
drive will be required for such action. Other brand CDROM drive may require 
its specific driver different from what supported in the recovery CD. 

Please use the recovery CD in rescue operation only. Using it 

otherwise may wipe out whatever stored in the HDD!

 All upgrade devices 

drivers needed for manual installation in usual way are available in the 
subfolder “\drivers” in OS recove red HDD and the latest versions of these 
required drivers will be available on our web:  http://www.posiflex.com.tw. 
Then follow instructions from your system integrator for software recovery. 

OPERATING SYSTEM INSTALLATION 

This product is a highly professionalized equipment. The installation 

of an OS into a machine without any preloaded OS could constitute major 
difficulty for average user or obstacle by possibly unintentional negligence 
even for PC veterans to accomplish such a task. Therefore, OS installation into 
a system without preloaded OS is highly discouraged. Posiflex shall not be 
responsible for any technical support to questions arisen due to non-preloaded 
OS. 

Summary of Contents for KS-6115





















Reviews: