6
Connecting Power Adapter and I/O Cables
To have the terminal ready for operation, please connect the connector of
power adapter and all of the connectors of required I/O cables respectively to
the 12VDC-IN power jack and appropriate I/O ports. Please make sure that
each of the cables is fully connected to each of the correct ports. Damages due
to incorrect connection or orientation are not covered by product warranty!
Before connecting power adapter and I/O cables to the I/O ports of the
terminal, please route and arranging the cables. Here, refer to the following
step-by-step instruction of cable routing and arrangement for the details.
1.
Remove the I/O port cover.
2.
Connect the connector of the
power adapter to the 12VDC-
IN power jack of the terminal
and I/O cables to the I/O ports
of the terminal.
3.
Cover the bottom I/O interface
and gather the I/O cables to the
cable arrangement area, as
indicated by the arrow.
Some cable connectors like the connectors of the COM or LAN cables have to
be gently inserted until a click is heard. It is recommended that the I/O ports,
such as COM port, should be screwed after the I/O cable connectors are
completely connected. And please make sure that each connector has to be
connected to the right peripheral device in the right way.
CAUTION: On doing insertion or extraction of a cable connector, please
always hold the connector head itself instead of pulling the
cable wire. Doing this could damage the cables and ports,
which is considered as an artificial damage and is not
covered by the warranty. The means of power cord should
be connected to a socket-outlet with earthing connection.
Cable out
