Part 5
S1
Set security code. (Default Setting: BIT 1,2,3 OFF and BIT
4,5,6,7,8 ON. Security code is 07H)
BIT
1
2
3
4
5
6
7
8
Number to be added to the
security code if OFF.
1
2
4
8
16
32
64
128
S2
BIT1 ON and BIT2 OFF to receive security code via Pin2 of P4
(DB9F).
BIT1 OFF and BIT2 ON* to receive security code via Pin3 of P4
(DB9F).
BIT3 OFF and BIT4 ON for dedicated RS-232C.
BIT3 ON and BIT4 OFF* for non-dedicated RS-232C.
(* denotes factory default setting)
CR4004 / 4104 / 4214 / 6214
1). Open the PC case. Put the
metal bracket with power
connector into one of the
I/O windows.
2). Connect the cable to the
HDD
type power
connector of PC power
supply. See illustration
below. Then close the PC
case.
3). Connect the DB-9
connector to the computer's serial port of COM1 (or COM2). Connect
the 4P phone plug connector to the added I/O bracket. See
below
illustration.
CR4005-II / 4105-II / 4215-II / 6215
1). Define a drawer number for the cash drawer so that this cash drawer is
going to respond accordingly in USB communication. Follow the table
below for “Switch settings” to adjust the switch S1 according to this
drawer number if it is not 7. Please note that within each system there
616P PHONE JACK
POWER CORD
COM1
616P PHONE JACK
4PIN PHONE JACK
DB9
