In order to ensure the most optimal and accurate performance of the system, please refer to Installation
Manual for in depth instructions.
Compliance with the following instructions ensures:
- problem-free performance,
- manufacturer's warranty.
Use only original manufacturer made spare parts and accessories.
- Wrench.
- Mounting bracket
.
- White cosmetical vaseline (not included in the set).
Product may be installed only by trained service professionals.
It is recommended to install pressure regulator before filter water inlet.
IMPORTANT NOTE! Before installing the product, shut off main water supply valve.
- Unscrew filter head from the filter housing (Fig. 1) using a wrench. To prevent damage, hold the wrench
exactly in horizontal position relative to the filter housing.
IMPORTANT NOTE! During the installation remember to use the appropriate screws. Application of
screws that are too long may result in permanent damage to the filter head.
- Screw the mounting bracket into openings 1, 2, 3 and 4 of the filter head using four metal screws (Fig. 2).
- Cut the pipe supplying cold water.
- Install mounting bracket and filter head to the wall.
- Install water shut off valve before and after the filter water inlet (pict. 3).
- Depending on the type of plumbing system, choose appropriate fittings and connections.
IMPORTANT NOTE! Remember to keep the proper direction of water flow (IN Inlet, OUT Outlet).
- Place the cartridge for cold water application inside the filter housing.
To seal connections use Teflon tape only.
Do not use with metal cone threaded
connections.
- Close water shut-off valve before and after the filter water inlet (Pict. 3).
- Unscrew the filter housing with your hand or using wrench. To prevent damage, hold the wrench exactly in
horizontal position relative to the filter housing. IMPORTANT NOTE! The filter housing is full of water! -
Remove used cartridge and replace it with a new one.
IMPORTANT NOTE! The casing contains two O-ring gaskets (one to be installed on the casing, the
other in the casing top). Do not loose them.
- Grease the O-rings with white cosmetical vaseline.
- Make sure that the O-rings are properly fixed (on the casing and in the casing top).
- Screw the filter housing into the filter head using wrench. To prevent damage, hold the
wrench exactly in
horizontal position relative to the filter housing.
Fig. 3
Fig. 2 Filter head - top view
Direction of water flow
Double O-ring
Fig.1 Accessories for
PF-HPB
12 BRASS
Filter Housing
1.
Safety Precautions
2.
Tools Required for
PF-HPB12
Filter Installation
3.
Installation
Cartridge Replacement
4.
1
2
3
4
Drinking Water System
Filter Head
EN
It is recommended to be placed before or after the hydrometer in the central supply. Avoid using it near
consumption (under the kitchen counter) due to the risk of breaking the filter case by hydraulic shock.
www.poseidonfilter.gr
