▪ Remove the ventilation screw.
▪ Open the oil drain screw.
The oil drain screw is located at the rear of the base of the column.
▪ Drain the old hydraulic oil into a container.
▪ Screw the oil drain screw back into the tank and fill with new hydraulic oil through the
ventilation screw opening.
▪ Screw the ventilation screw into the tank.
▪ Turn on the machine and allow it to run for a short while.
▪ Check the oil level and top up hydraulic oil if necessary.
Total filling capacity of the hydraulic system:
Quantity
38 litres
Our hydraulic system is filled with OMV HLP M46 hydraulic oil.
This high-quality oil comes highly recommended when changing the oil.
A mixture of products of the same quality poses no problem.
Recommended hydraulic oils
Manufacturer
Oil specification
OMV
ATF II
SHELL
Donax TA
ELF
Hydrelf DS 46
ESSO
Univis N46
CASTROL
Hyspin AWH-M 46
ARAL
Vitam VF46
GENOL
Hydraulic oil 520
FUCHS
Plantohyd 32S * / Renolin B46 HVI
*.....biological hydraulic oils
Oil filter
1
2
1
Filter cover
2
Filter insert
The filter insert should be changed every time the oil is changed.
Any aluminium particles can be disregarded, as these occur when the pump is running in.
Do not wash out the filter insert with petrol or paraffin products, as these damage it.
9.2.1.1
9.2.2
Maintenance
29
