POS-X XR-200, Product Specification

Page: 2 / 17

Page 1
Features
Dip Switch Configuration
Emulation mode, communications mode, baud rate, serial/parallel handshake, and head
printing characteristics are all configured through dip switch settings.
Data Buffer
The XR-200 printer has a built-in 48 Kilobyte I/O buffer allowing the host computer to free
itself after sending the print data.
Reliable communications
Centronics parallel or RS-232C compatible communications is built-in.
The XR-200 supports multiple baud rates, protocols, and handshaking on its parallel &
serial interfaces.
User controls
A power switch, a paper feed switch, power LED and Paper Low/Out error LED provide
ease of use.
Self Test Mode
A comprehensive self-test mode is available which describes the printer configuration and
dip switch setting information along with the version number of firmware installed.
Print orientation
The printer is capable of printing normal and upside down, the print orientation is selected
by software commands.
Selectable international characters
The XR-200 supports international characters selectable by software control.
Multiple Fonts/Sizes
Two different resident fonts are available for printing diversity. Each of these fonts can be
printed in normal, double wide, double height, and quadruple sizes. Both fonts and sizes
are software selected.
Bit image graphic
Two formats for bit mapped graphics are provided.
Error detection
The XR-200 can detect paper-out and paper-jam as well as paper near-end, controller
malfunction, and cover open status.
Peripheral Drive
Two cash drawer drivers are provided.