9
PIN
SIGNAL
DESCRIPTION
1 Signal
GND
-
2
Drawer kick-out drive signal 1
Output
3 Drawer
open/close
signal
Input
4 +24V
-
5
Drawer kick-out drive signal 2
Output
6 Signal
GND
-
2-3. Loading the Paper Roll
Notes: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that
have the paper glued to the core because the printer cannot detect the paper end correctly.
1. Turn off power switch.
2. Make sure that the printer is not receiving data; Otherwise, data may be lost.
3. Open the paper roll cover by pushing down the cover-open push button.
3. Remove the used paper roll core if there is one inside.
4. Insert new paper roll as shown.
