System Installation
WEB-21A0 User
’s Manual
2-1
Chapter 2
System Installation
This chapter provides you with instructions to set up your system. Definitions
and locations of all the interfaces are described so that you can easily configure
your system. For more detailed PIN assignment and jumper setting, please refer
to user’s manual of NANO-6050.
2.1 HDD Installation
It’s easy to install and maintenance the 2.5” HDD/SSD by just open the back
cover. (The height must be less than 10mm)
Step 1. Loosen the 4 screws of the back
cover
Step 2. Take out the back cover
Step 3. Loosen the 4pcs screws and take
out the HDD bracket
Step 4. Install 2.5” HDD/SSD on the
bracket with screws
M3x10L*4
Step 5. Attach HDD bracket back to
back cover and connect to SATA cable
Step 6. Tighten the 4 screws of the back
cover
