Portwell WADE-8172, User Manual

Page: 61 / 77

WADE-8172
Copyright © Portwell 2017 WADE-8172 User's Guide 61
Feature Description Options
Boot Option #1
(with storage device)
Sets the system boot order
★
Disabled, storage device
Hard Drive BBS Priorities Set the order of the legacy devices in this group Select storage Device
Boot From Onboard LAN Boot From Onboard LAN
★
Disabled, Enabled
Setup Prompt Timeout Configure the number of seconds to wait for the UEFI setup utility.
★
1
Bootup Num-Lock
Select whether Num Lock should be turned on or off when the system boots
up.
★
On, Off
Boot Beep
Select whether the Boot Beep should be turned on or off when the system
boots up. Please note that a buzzer is needed.
★
Disabled, Enabled
Full Screen Logo
(Enabled)
Enable to display the boot logo or disable to show normal POST messages.
★
Disabled, Enabled
AddOn ROM Display Enable to display the boot logo or display to show normal POST messages.
★
Enabled, Enabled
CSM(Compatibility Support Module)
Feature Description Options
CSM
(Enabled)
Enable to launch the Compatibility Support Module. If you are using
Windows 8 64-bit UEFI and all of your devices support UEFI , you may also
disable CSM for faster boot speed.
★
Disabled,Enabled
Launch PXE OpROM Policy
Select UEFI only to run those that support UEFI option ROM only. Select
Legacy only to run those that support legacy option ROM only. Select Do
★
Legacy only, Do not launch,
UEFI only