WADE-8170 Quick Installation Guide
4 / 9
If any of these items is damaged or missed, please contact your vendor and save all packing
materials for future replacement and maintenance.
CHAPTER 2
2.
Hardware Configuration Setting
This chapter gives the definitions and shows the positions of jumpers, headers and
connectors. All of the configuration jumpers on WADE-8170 are in the proper position. The
default settings shipped from factory are marked with an asterisk (
).
In general, jumpers on the Mini ITX are used to select options for certain features. Some of
the jumpers are designed to be user-configurable, allowing for system enhancement. The
others are for testing purpose only and should not be altered. To select any option, cover the
jumper cap over (SHORT) or remove (NC) it from the jumper pins according to the following
instructions. Here, NC stands for “Not Connect”.
2.1
Board Layout
