Troubleshooting
WADE-8016 User’s Manual
5-1
Chapter 5
Troubleshooting
This chapter provides a few useful tips to quickly get WADE-8016 running with
success. As basic hardware installation has been addressed in Chapter 2, this chapter
will primarily focus on system integration issues, in terms of BIOS setting, and OS
diagnostics.
5.1
Hardware Quick Installation
ATX Power Setting
Unlike other Mini-ITX board computer, WADE-8016 supports ATX only. Therefore,
there is no other setting that really needs to be set up. However, there are only two
connectors that must be connected—J17 (24pins ATX Power Connector) Fighre.
It is assumed that users have correctly adopted modules and connected all the
devices cables required before turning on ATX power. 240-pin DDR3 Memory,
keyboard, mouse, SATA hard disk, VGA connector, power cable of the device, ATX
accessories are good examples that deserve attention. With no assurance of properly
and correctly accommodating these modules and devices, it is very possible to
encounter system failures that result in malfunction of any device.
To make sure that you have a successful start with WADE-8016, it is recommended,
when going with the boot-up sequence, to hit “Del” key and enter the BIOS setup
menu to tune up a stable BIOS configuration so that you can wake up your system far
well.
