RUBY-D718VG2AR
Copyright © Portwell 2016 RUBY-D718VG2AR
User's Guide
27
6
System Resources
6.1
Intel® Kabylake / Skylake-S PCH
Intel® Q170 Chipset (Intel® GL82Q170 PCH)
Intel® C236 Chipset (Intel® GL82C236 PCH)
6.2
Main Memory
RUBY-D718 provides 4 x 288-pin Long-DIMM sockets which supports DDR4 ECC/non-ECC memory. The maximum memory can be up to 64GB. Memory clock
and related settings can be detected by BIOS via SPD interface.
Watch out the contact and lock integrity of memory module with socket, it will impact on the system reliability. Follow normal procedures to install memory
module into memory socket. Before locking, make sure that all modules have been fully inserted into the card slots.
6.3
Installing the Single Board Computer
To install your RUBY-D718 into standard chassis or proprietary environment, please perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure CPU,CPU cooling and memory module on right position
Step 3 : Place RUBY-D718 into the dedicated position in the system
Step 4 : Attach cables to existing peripheral devices and secure it
