Troubleshooting
RUBY-9712VG2A User’s Manual
5-4
(2) Insert 12V 4-pin power connector on J9. Although it is 8-pin 12V power
connector, but you still can use standard 4-pin 12V power connector, if the
power supply only has 4-pin power connector.
Figure 5-5
Step 5: Boot through Power toggle switch
(1) Insert Power toggle switch on pin 6 and 8 of J30.
(2) Please make sure power is ready, and then press Power toggle switch to start the
System. Besides, you should hear short beep during booting up. Short beep
means system boot up okay. If not, please check the above steps certainty.
Figure 5-6
