BIOS Setup Information
RUBY-7720VG2A User’s Manual
4-26
Resource Controlled By
BIOS can automatically configure the entire boot and plug and play compatible
devices. If set to Auto, IRQ DMA and memory base address fields can not be selected,
since BIOS automatically assigns them.
The choice: Auto (ESCD), Manual.
※
IRQ Resources
When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the interrupt.
The choice: Press Enter.
IRQ-3/IRQ-4/IRQ-5/IRQ-7/IRQ-9/IRQ-10/IRQ-11/IRQ-12/IRQ-14/IRQ-15
assigned to.
The choice: PCI/ISA PnP, Legacy ISA.
※
DMA Resources
When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the DMA Resource.
The choice: Press Enter.
DMA-0/DMA-1/DMA-2/DMA-3/DMA-4/DMA-5/DMA-6/DMA-7 assigned to.
The choice: PCI/ISA PnP, Legacy ISA.
PCI/VGA Palette Snoop
This field determines whether the MPEG ISA/VESA VGA cards can work with
PCI/VGA or not. The default value is Disabled.
The choice: Disabled, Enabled
Maximum Payload Size
Set maximum TLP payload size for the PCI Express devices. The Unit is Byte.
The choice: 128, 256, 512, 1024, 2048, and 4096.
