BIOS Setup Information
ROBO-8712VLA User’s Manual
4-16
Parallel Port Mode
There are four different modes for the onboard parallel port :
SPP
Switch to SPP mode
EPP
Switch to EPP mode
ECP
Switch to ECP mode
ECP + EPP
Switch to ECP + EPP mode
Normal
Switch to Normal mode
EPP Mode Select
Select different version of EPP mode.
The choice: EPP1.7, EPP1.9.
ECP Mode Use DMA
Select a proper DMA channel for ECP mode.
The choice: 3, 1.
PWRON After PWR-Fail
This item allows user to configure the power status of using ATX power supply after
a serious power loss occurs.
On
System automatically restores power back
Off
System stays at power –off
Former-Sts
System restores back to previous status
(On or Off)
Midi Port Address
There are 4 choices. There are Disabled, 330, 300 and 290.
The choice: Disabled, 330, 300, 290.
Midi Port IRQ
To assign an IRQ number to Midi Port.
The choice: 5, 10.
Watch Dog Timer Select
This BIOS testing option is able to reset the system according to the selected table.
The choice: Disabled, 10 Sec, 20 Sec, 30 Sec, 40 Sec, 1 Min, 2 Min, 4 Min.
