System Installation
ROBO-8712E Series User’s Manual
3-3
3.3
Installing the Single Board Computer
To install your ROBO-8712E series into standard chassis or proprietary environment,
you need to perform the following:
Step 1: Check all jumpers setting on proper position
Step 2: Install and configure CPU and memory module on right position
Step 3: Place ROBO-8712E series into the dedicated position in your system
Step 4: Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that your SBC is properly inserted and fixed by mechanism.
Otherwise, the system might be unstable or do not work due to bad contact of
PICMG 1.0 PCI plus ISA-bus slot.
Note:
Please refer to section 3-4-1 to 3-4-3 to install INF/VGA/LAN drivers.
3.3.1
Chipset Component Driver
The chipset on ROBO-8712E series is a new chipset that a few old operating systems
might not be able to recognize. To overcome this compatibility issue, for Windows
Operating Systems such as Windows 98SE /2000 /XP / Server 2003, please install its
INF before any of other Drivers are installed. You can find very easily this chipset
component driver in ROBO-8712E series CD-title.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
