Portwell ROBO-8120VG2R, User Manual

Page: 25 / 70

System Installation
ROBO-8120VG2R User’s Manual 3-3
Note:
Don’t touch directly by your hand or impacts internal align balls of CPU socket to
avoid motherboard destruction, it is a precise actuator.
3) Push down the lever to lock processor chip into the socket once CPU fits.
4) Follow the installation guide of cooling fan or heat sink to mount it on CPU surface
and lock it on the LGA 1366 socket.
Removing CPU
1) Unlock the cooling fan first.
2) Lift the lever of CPU socket outwards and upwards to the other end.
3) Carefully lifts up the existing CPU to remove it from the socket.
4) Follow the steps of installing a CPU to change to another one or place handling bar
to close the opened socket.
Configuring System Bus
ROBO-8120VG2R will automatically detect the CPU FSB 800/1066/1333 MHz used.
CPU speed of Intel Core 2 Duo and Intel Core 2 Quad Processor can be detected
automatically.
Inserting Memory Module
We suggest you to insert the memory from DIMM0 to DIMM3 sequentially when you
have one more memory for using. When you use only one memory in system, we
suggest to insert in DIMM 0. If you want to use the channel A- slot 2, you must use
channel A- slot 1 first. Otherwise, the system can’t boot. The Channel B has the same
rule.
DIMM3
ECC DDR3 DIMM channel B - slot 2
DIMM2 ECC DDR3 DIMM channel B - slot 1
DIMM1 ECC DDR3 DIMM channel A - slot 2
DIMM0 ECC DDR3 DIMM channel A - slot 1