Portwell ROBO-6912VG2AR, User Manual

Page: 40 / 77

ROBO-6912VG2AR
Copyright © Portwell 2020 ROBO-6912VG2AR User's Guide 40
5 BIOS Setup Items
5.1 Introduction
The following section describes the BIOS setup program. The BIOS setup program can be used to view and change the BIOS settings for the module. Only
experienced users should change the default BIOS settings.
5.2 BIOS Setup
Power on the computer and the system will start POST (Power on Self Test) process. When the message below appears on the screen, press <Delete> or
<ESC> key will enter BIOS setup screen.
Press <ESC > or <Delete> to enter SETUP
If the message disappears before responding and still wish to enter Setup, please restart the system by turning it OFF and On or pressing the RESET button. It
can be also restarted by pressing <Ctrl>, <Alt>, and <Delete> keys on keyboard simultaneously.
Press <F1> to Run General Help or Resume
The BIOS setup program provides a General Help screen. The menu can be easily called up from any menu by pressing <F1>. The Help screen lists all the
possible keys to use and the selections for the highlighted item. Press <Esc> to exit the Help Screen.