INSTALLATIONS
6 ROBO-3600VLA User’s Manual
Installing the Memory (DIMM)
The ROBO-3600VLA Embedded Board supports one 168-pin DIMM
socket for a maximum total memory of 512MB in SDRAM type.
The memory module capacities supported are 64MB to 512MB.
Installing and Removing DIMMs
To install the DIMM, locate the memory slot on the Embedded Board
and perform the following steps:
1.
Hold the DIMM so that the two keys of the DIMM align with those on
the memory slot.
2.
Gently push the DIMM in an upright position until the clips of the slot
close to hold the DIMM in place when the DIMM touches the bottom
of the slot.
3.
To remove the DIMM, press the clips with both hands.
Top View of DIMM Socket
DIMM
Lock
Lock
Lock
Lock
