Hardware Configuration
PEB-2771VG2A/PEB-2781VG2A User’s Manual
2-1
Chapter 2
Hardware Configuration
This chapter gives the definitions and shows the positions of jumpers, headers and
connector. All of the configuration jumpers on PEB-2771/2781 are in the proper
position. The default settings are indicated with a star sign (
★
).
2.1 Jumper
Setting
In general, jumpers on the single board computer are used to select options for certain features.
Some of the jumpers are designed to be user-configurable, allowing for system enhancement.
The others are for testing purpose only and should not be altered. To select any option, cover
the jumper cap over (SHORT) or remove (NC) it from the jumper pins according to the
following instructions. Here NC stands for “Not Connect”
Component side
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from