Hardware Configuration
NANO-6060 User’s Manual
2-1
Chapter 2
Hardware Configuration
This chapter gives the definitions and shows the positions of jumpers, headers and
connectors. All of the configuration jumpers on NANO-6060 are in the proper
position. The default settings shipped from factory are marked with an asterisk (
♣
).
2.1 Jumper
Setting
In general, jumpers on the single board computer are used to select options for
certain features. Some of the jumpers are designed to be user-configurable, allowing
for system enhancement. The others are for testing purpose only and should not be
altered. To select any option, cover the jumper cap over (SHORT) or remove (NC) it
from the jumper pins according to the following instructions. Here NC stands for
“Not Connect”
Figure 2-1 NANO-6060 Jumper and Connector Locations
