Preface
3
How to Use This Manual
The manual describes how to configure your LEAD-PND-2150/LEAD-PND-2360
HMI system to meet various operating requirements. It is divided into four chapters,
with each chapter addressing a basic concept and operation of LEAD-PND.
Chapter 1: System Overview.
Present what you have in the box and give you an
overview of the product specifications and basic architecture for LEAD-PND.
Chapter 2: System Operation.
Show how to operate LEAD-PND. This chapter
includes the information about basic system operation like turn on/off, signal
selection, OSD function and OSD command control.
Chapter 3: Important Instructions.
Indicate some instructions which must be
carefully followed when the HMI system is used.
Chapter 4: Frequent Asked Questions.
Provide the answers for the most
frequently asked questions.
The content of this manual is subject to change without prior notice. These changes
will be incorporated in new editions of the document.
The vendor
may make
supplement or change in the products described in this document at any time.
Portwell, Inc. clearly informs the users that this manual only encloses a general
description of technical processes and instructions which may not be applicable in
every single case. In cases of doubt, please contact Portwell, Inc.
© 2020 Portwell, Inc. All Rights Reserved.
Portwell, Inc.
Address
：
No. 242, Bo-Ai Street, Shu-Lin District, New Taipei City, 238, Taiwan
TEL
：
+886-2-7731-8888
；
FAX
：
+886-2-7731-9888
