System Installation
WEB-35C3 User’s Manual
3-43
Communication
with
slow
devices may require more than
1 stop bit.
Flow Control
Flow control can prevent data
loss from buffer overflow. When
sending data, if the receiving
buffers are full, a ‘stop’ signal
can be sent to stop the data
flow. Once the buffers are
empty, a ‘start’ signal can be
sent to re-start the flow.
Hardware flow control uses two
wires to send start/stop signal.
★
None,
Hardware
RTS/CTS
VT-UTFB Combo Key Support
Enable VT-UTF8 Combination
Key Support for ANSI/VT100
terminals
Disabled,
★
Enabled
Recorder Mode
With this mode enabled only
text will be sent. This is to
capture Terminal data.
★
Disabled, Enabled
Resolution 100x31
Enables or disables extended
terminal resolution
★
Disabled, Enabled
Legacy OS Redirection Resolution
On Legacy OS, the Number of
Rows and Columns supports
redirection
★
80x24, 80x25
Putty KeyPad
Select
FunctionKey
and
KeyPad on Putty
★
VT100,
LINUX,XTERMR6,
SCO,ESCN,VT400
Redirection After BIOS POST
The
settings
specify
if
BootLoader is selected then
Legacy console redirection is
disabled before booting to
legacy OS. Default value is
Always Enable with means
Legacy console Redirection is
enabled for Legacy OS.
★
Always
Enable,
BootLoader
