3
st
Resetting the (
1 method
):
1.
The remote does not need to be programmed.
2.
Switch OFF the power supply for 3 seconds.
3.
Switch ON the power supply for 3 seconds.
4.
Switch OFF the power supply for 3 seconds.
5.
Switch ON the power supply.
6.
The motor confirms entering of the resetting procedure by short movement up and down twice.
7.
Push the P2 button on any channel of any remote ( confirms with short movement)
.
8.
Push the STOP button on the remote ( the motor confirms by short movement of the roller shutter
and finishes the resetting)
.
rd
Resetting the
receiver
(
2 method
):
1.
Press the setting switch on the
receiver
for 3-5 seconds. The device enters the resetting
procedure (
LED
flashes and You can hear a beep)
.
2.
Press again the setting switch on the
receiver
for 5 seconds. The device finishes the resetting
procedure (
LED
and beep switch off)
.
Resetting the
receiver:
Copying settings:
1.
The remote must be already programmed.
2.
Push the P2 button twice on the already existing channel of a remote.
3.
Press the P2 button on the remote that You want to add ( confirms with short movement)
