USER MANUAL
–
Portman Lights P1 Retro Lamp
|
Lamp and fuse replacement
P1 Retro Lamp v2.0
11/16
Lamp and fuse replacement
To replace the lamp:
•
Disconnect the fixture from AC power.
•
Make sure the fixture and lamps are cool.
•
Open the front cover by releasing a screw located on top of the front cover.
•
Gently push the lamp towards one of the mounting brackets and remove the
used lamp by pulling it up.
•
Put the new lamp onto the mounting brackets.
•
Do not touch the new lamp with bare hands. Use gloves or a cloth to hold the
lamp.
•
Close the front cover and fasten the screw before applying power.
REMEMBER!
Always use safety glasses to protect your eyes when changing a lamp!
Inspect the front covers and the front cover safety mesh before you use the fixture. If
you will notice any damages, holes in the mesh, or if the mesh will get loose, do not use
the fixture and immediately swap the front cover for a new one.
To replace the fuse:
•
Disconnect the fixture from AC power.
•
Make sure the fixture is cool.
•
Fuses are located on the back cover of the fixture.
•
To unscrew the fuse holder use “flat
-
blade” screwdriver. First gently push
the
cover of the fuse holder and rotate it a quarter turn clockwise.
•
After you unlock cover of the fuse holder pull it up and replace the fuse.
•
Put the cover with new fuse back to the fuse holder, gently push it with
screwdriver in the proper orientation and rotate it a quarter turn
counterclockwise.
