Page 6
For technical questions, please call 1-888-866-5797.
Item 62630
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Set Up Instructions
Read the ENTIRE IMpORTANT SAFETy INSTRUcTIONS section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Make sure that the power Switch/Trigger is in the off-position and unplug the tool
from its electrical outlet before performing any procedure in this section.
Note:
For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Assembly
Install Guard
1. Slide tabs on Guard (16) into slots
on the sides of the Housing.
2. Make sure Guard is aligned correctly,
as show in Figure A.
3. Attach Guard to Housing, using
two Flange Screws (15).
Guard (16)
Flange Screws (15)
hidden behind guard
Housing
Figure A: Installing Guard
