Page 8
For technical questions, please call 1-888-866-5797.
Item 56808
SaFEty
OpEra
tiOn
MaintEnancE
aSSEMbl
y
tension Saw chain
caUtiOn!
Wear heavy-duty work gloves when handling Saw chain.
nOticE: to prevent damage to Saw chain,
do not tension hot chain.
let chain cool before tensioning.
Check tension:
a. Before every use.
b. Often during first half hour of use.
c. Periodically during use.
1. Snap Test: Pull Saw Chain away from
bottom of Guide Bar, then let go. Saw Chain
should snap back to its original position,
solidly contacting bottom of Guide Bar.
2. Pull Saw Chain by hand around Guide Bar
several times, it should feel snug and
move freely around Guide Bar.
3. Adjust tension as necessary by tightening or
loosening Tensioning Screw, then repeating steps
1. and 2., until proper tension is achieved.
Fill automatic Oiler reservoir
nOticE:
to prevent damage to Saw chain, Drive bar and Drive Sprocket, keep Oil reservoir
full. Do not operate pole Saw without oil. Do not put used oil in reservoir.
note:
Oil is automatically applied to
the Saw Chain during operation.
Fill Oiler Reservoir:
a. Before every use.
b. When oil level reaches MIN
mark on Oil Level Gauge.
1. Remove Oil Fill Cap.
2. Using funnel, fill tank with bar and
chain oil (sold separately).
3. Use clean cloth to remove excess oil.
4. Replace Oil Fill Cap and tighten.
Oil level
Gauge
Oil Fill
cap
adjust pole Saw length
Loosen Extension Collar, extend pole to desired
length, then tighten Extension Collar securely.
Extension
collar
WarninG!
to prevent serious injury,
check Extension collar for tightness
periodically during use.
