12 |
P a g e
Changing Light Bulbs Continued
Light bulbs need to be replaced when you notice a dark section of the
flame or when clarity and detail of the coal effect disappears.
Small Wall Unit
1.
Remove the face. This is done by lifting the face up and swinging the
face clear of the fire. Care should be taken not to damage the face.
2.
Remove the 8 screws on the front bottom cover of the fireplace and
remover cover. (
Figure 10
).
3.
Once the bulb has been replaced, replace the cover, screws and face.
Large
Wall
Unit
See
supplemental
instructions
Insert
&
Stand
Alone
units
1.
Gain access to the back of the fireplace.
2.
Remove 4 screws from bottom center cover to access light bulbs.
3.
Once the bulbs have been replaced, replace cover, screws and set
fireplace back into place.
Warranty
Portland Willamette’s products are warranted only to the original retail purchaser-user to be free from defects in
material and workmanship at time of purchase for 2 years. Consumable items are not covered.
PORTLAND WILLAMETTE DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, AND SPECIFICALLY
DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
SHALL PORTLAND WILLAMETTE BE LIABLE, TO A CUSTOMER OR USER, IN WARRANTY, COINTRACT, NEGLIGENCE, STRICT
LIABILITY OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE
CAUSED BY ONE OR MORE OF OUR PRODUCTS, BEYOND THE COST TO THE ORIGINAL PURCHASER- USER OF THE SUBJECT
PRODUCT OR PRODUCTS. THEREFORE, THE SOLE AND EXCLUSIVE REMEDY AGAINST US FOR BREACH OF WARRANTY, BREACH
OF CONTRACT OR IN NEGLIGENCE OR STRICT LIABILITY OR OTHERWISE SHALL BE VESTED ONLY IN THE RETAIL
PURCHASER-USER AND SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE SUBJECT PRODUCT AT OUR
OPTION OR, IF WE CHOOSE, REFUND OF THE PURCHASE PRICE. INSTALLATION AND REMOVAL CHARGES AND RELATED LABOR
COSTS WILL NOT BE OUR LIABILITY AND ARE NOT COVERED BY THE STATED EXCLUSIVE REMEDY.
