Lowes.com/portfolio
5
ASSEMBLY INSTRUCTIONS
4. If necessary, strip 1/2 in. of insulation from the end
of each supply wire. Twist the stripped ends of each
strand of wire with pliers (not included).
5. Connect supply and fixture (A) wires according to the
diagram and these steps:
• Connect the Bare wire from the fixture (A) to the
Bare/Green (ground) supply wire.
• Connect the Black wire from the fixture (A) to the
Black (hot) supply wire.
• Connect the White wire from the fixture (A) to the
White (common) supply wire.
• Secure all wiring connections together with wire
connectors (CC).
• Loop the Bare wire from the fixture (A) around the
ground screw on the mounting bracket (C). Tighten
screw to hold bare wire in place.
Note:
If house wires are different colors than referred
to above, stop immediately. It is recommended a
professional electrician determines the proper wiring.
Hardware Used
CC
Wire Connector
x 3
6. Tape the wire connectors (CC) to the wire using
electrical tape (not included). Turn the spliced/taped
wires upward and gently push the wires and wire
connectors (CC) into the outlet box.
WARNING:
Ensure no bare wire or wire strands
are visible after making connections. Place the Black
and White wire connections on opposite sides of the
outlet box.
Hardware Used
CC
Wire Connector
x 3
CC
CC
CC
Fixture
Black
White
Bare/Green
Black
White
Bare
6
4
5
