Flange Machine
Part Number 6Z8303
Machine Orientation
23
Thread Stand
The thread stand is on the upper right corner of the sewing tabletop and has
four round rods to hold four spools of thread. The thread stand requires
assembly and attachment to the table. For assembly instructions, see
“Assembling the Thread Stand” on page 13.
Rotary Flange Cutter
The rotary flange cutter is located under the tabletop, to the left of the sewing
head and comes attached to the table. This device cuts the flange material
through a small opening in the tabletop. Pressing the foot pedal to the right of
the main sewing pedal activates the flange cutter.
Figure 4.4
Rotary flange cutter
Waste Remover System
The waste remover system is a vacuum generated by an air supply. The system
moves trim waste through the pipe and deposits it into the waste container. The
factory assembles the system and connects it to the machine prior to shipping.
After the machine is received, attach the waste pipe and the waste container to
the system by fitting the pieces together.
rotary flange cutter
