12
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
• Unit will not start.
• Cord not plugged in.
• Plug tool into a working outlet.
• Circuit fuse is blown.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a PORTER-CABLE
service center or authorized
servicer.)
• Circuit breaker is tripped.
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a
PORTER-CABLE service center or
authorized servicer.)
• Cord or switch is damaged.
• Have cord or switch replaced
at
PORTER-CABLE Service
Center or Authorized Servicer
For assistance with your product, visit our website at www.portercable.com for a list of
service centers, or call the PORTER-CABLE Customer Care Center at (888) 848-5175.
MAINTENANCE
WARNING:
Blow dirt and dust out of
all air vents with clean, dry air at least once
a week. To minimize the risk of eye injury,
always wear ANSI Z87.1 approved eye
protection when performing this.
WARNING:
Never use solvents or
other harsh chemicals for cleaning the non-
metallic parts of the tool. These chemicals
may weaken the plastic materials used in
these parts. Use a cloth dampened only
with water and mild soap. Never let any
liquid get inside the tool; never immerse
any part of the tool into a liquid.
Use only mild soap and damp cloth to
clean the tool. Never let any liquid get
inside the tool; never immerse any part of
the tool into a liquid.
IMPORTANT:
To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment (other than those listed
in this manual) should be performed
by authorized service centers or other
qualified service organizations, always
using identical replacement parts.
LUBRICATION
PORTER-CABLE
tools are properly
lubricated at the factory and are ready for
use.
SERVICE INFORMATION
All quality tools will eventually require
servicing and/or replacement of parts.
For information about PORTER-CABLE,
its factory service centers or authorized
warranty service centers, visit our website
at www.portercable.com or call our
Customer Care Center at (888) 848-5175.
All repairs made by our service centers
are fully guaranteed against defective
material and workmanship. We cannot
guarantee repairs made or attempted
by others. You can also write to us for
information at PORTER-CABLE, 4825
Highway 45 North, Jackson, Tennessee
38305, (888) 848-5175 - Attention:
Product Service. Be sure to include all of
the information shown on the nameplate
of your tool (model number, type, serial
number, etc.).
ACCESSORIES
WARNING:
Since accessories, other
than those offered by PORTER-CABLE,
have not been tested with this product,
use of such accessories with this tool
could be hazardous. To reduce the risk of
injury, only PORTER-CABLE
recommended accessories should be
used with this product.
A complete line of accessories is available
from your PORTER-CABLE Factory
Service Center or a PORTER-CABLE
Authorized Warranty Service Center.
Please visit our Web Site www.portercable.
com for a catalog or for the name of your
nearest supplier.
