background image

5- ENG

A09608

•  Reactive force of spray will cause gun/

wand to kickback, and could cause the op-

erator to slip or fall, or misdirect the spray. 

Improper control of gun/wand can result in 

injuries to self and others.

•  Do not overreach or stand on an unstable 

support. 

•  Do not use pressure washer while 

standing on a ladder. 

•  Grip gun/wand firmly with both hands. 

Expect the gun to kickback when 

triggered.

•  If proper starting procedure is not 

followed, engine can kickback causing 

serious hand and arm injury.

•  If engine does not start after two pulls, 

squeeze trigger of gun to relieve pump 

pressure. Pull starter cord slowly until 

resistance is felt. Then pull cord rapidly 

to avoid kickback and prevent hand or 

arm injury.

•  The spray gun/wand is a powerful clean-

ing tool that could look like a toy to a 

child.

•  Keep children away from the pressure 

washer at all times.

RISK OF UNSAFE OPERATION

HAZARD

WHAT

 

CAN

 

HAPPEN

HOW

 

TO

 

PREVENT

 

IT

•  Unsafe operation of your pressure washer 

could lead to serious injury or death to 

you or others.

•  Do not use chlorine bleach or any other 

corrosive compound.

•  Become familiar with the operation and 

controls of the pressure washer.

•  Keep operating area clear of all persons, 

pets, and obstacles.

•  Do not operate the product when 

fatigued or under the influence of alcohol 

or drugs. Stay alert at all times.

•  Never defeat the safety features of this 

product.

•  Do not operate machine with missing, 

broken, or unauthorized parts.

•  Never leave wand unattended while unit 

is running.

RISK OF INJURY FROM SPRAY

HAZARD

WHAT

 

CAN

 

HAPPEN

HOW

 

TO

 

PREVENT

 

IT

•  High velocity fluid spray can cause 

objects to break, propelling particles at 

high speed.

•  Light or unsecured objects can become 

hazardous projectiles.

•  Always wear ANSI approved Z87 safety 

glasses.Wear protective clothing to protect 

against accidental spraying.

•  Never point wand at, or spray people or 

animals.

•  Always secure trigger lock when wand 

is not in service to prevent accidental 

operation.

•  Never permanently secure trigger in pull 

back (open) position.

 

Summary of Contents for A09608-0412-0





















Reviews: