Porter & Charles MWPS60TM, User Manual, Page: 21 / 41

19
USA
When the oven is working...
Interrupting a cooking cycle
You can stop the cooking process at any time by
pressing the
Start/Stop key once or by opening
the oven door.
In both cases:
Microwave emission is stopped
immediately .
The grill is de-activated but is still very hot.
Danger of burning!
The timer stops and the display shows the
remaining amount of operating time.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be
evenly cooked.
2. Change the process parameters.
3. Cancel the process by pressing the
Start/Stop key.
To restart the process, close the door and press
the
Start/Stop key
Altering parameters
The operating parameters (time, weight, power,
etc.) can only be altered when the cooking
process has been interrupted by proceeding as
follows:
1. To alter the time, turn the rotating knob. The
new time defined is immediately valid.
2. To alter the power, press the Weight/Power
Selection key. The respective light start to
flash. Alter the parameter by pressing the “-
“and “+”keys and confirm by pressing the
Power Selection key again.
Cancelling a cooking cycle
If you wish to cancel the cooking process, press
the
Start/Stop key for 3 seconds.
You will then hear a beep and the time will appear
on the
display .
End of a cooking cycle
At the end of the process you will hear three
beeps and the display will show the word
“End”
.
The beeps are repeated every 30 seconds until
the door is opened or the
Start/Stop key is
pressed.