Porter & Charles 30 inch warming drawer, User Manual, Page: 11 / 12

11
I - Electrical wiring diagrams and instructions
WARNING:
All aspects of the installation must conform with the requirements of the standard North
America (within North America) wiring rules, as well as your local electrical and building
codes and regulations, and any other applicable requirements and conditions of your local
power supply authority.
A licensed electrician must perform the electrical work when installing this appliance. The
supply cable and fuse rating must be suitable for the appliance.
120 Volt 60hZ
WARNING:
To avoid the risk of fire, electric shock or injury to persons, installation work and electrical
wiring must be done by qualified people in accordance with all applicable codes and
standards, including fire-rated conditions.
Make sure that incoming voltage is the same as unit rating. An electric rating plate specifying
voltage, hertz, wattage is attached to the product. Wiring the warming drawer with more voltage
than is rated for may cause severe damage to the thermostat, element, and other components.
To avoid power borne interference, this appliance must be installed individually on a separate and
distinct final sub-circuit.
WARNING
Electrical Loads
115Volt 60Hz
Heating element 200 W
TOTAL RATING 0.2 KW